Press and current affairs

Tous
Press release
Press review
  •
    5 November 2021
    Actualités, Press release
    The Steadiest project: waypoint
    NEXTEAM GROUP develop the STEADIEST transmission for Next-Generation Civil Tiltrotor November 2021 - NEXTEAM Group, and his partners Conseil & Technique and Ecole Nationale Supérieure des Arts et Métiers, validate the definition of composite architecture for transmission drive shaft which allows to link the two nacelles of aircraft. The 10 meter...
  •
    7 October 2021
    Press release
    Consolidation in the aeronautics industry
                                                                                                     ...
  •
    5 April 2021
    Actualités, News, Press release
    The Steadiest project: technological challenges
    April 2021 - The Steadiest project was born from an issue raised by the industrialist Leonardo and aims to develop an entire mechanical power transmission chain for a convertible type device: a tilting rotor or tilt helicopter rotor. NEXTEAM GROUP is committed to this project with the desire to...
  •
    30 November 2020
    Actualités, Press release
    A 100% digital Aeromart Show for NEXTEAM GROUP
    At the start of December, NEXTEAM GROUP will participate in the Aeromart Toulouse Show in its 100% digital version. Exceptionally due to the ban of gatherings, the Aeromart Show scheduled for December 1, 2 and 3 in Toulouse, plays extra time until December 8 and 9 and has turned into...
  •
    17 November 2020
    Actualités, Press release
    Steadiest project team participates in SAMPE 2020
    On November 26, a technical e-day will take place, exceptionally  100% remote, organized by SAMPE. The program for this day: conferences and presentation of innovative projects like our STEADIEST project conducted by NEXTEAM GROUP teams and 2 partners (Conseil & Technique and Arts & Métiers). The technical advances which mark out...
  • chaine de transmission tilrotor
    28 September 2020
    News, Press release
    STEADIEST project continues to develop
    NEXTEAM Group, with its partners Conseil et Technique and the National School of "Arts et Métiers", is about to validate the transmission architecture of the New Generation Civil TilRotor (NGCTR). 10 meters long, the transmission chain developed by the STEADIEST consortium has reached the Preliminary Design Review. This is...
  •
    20 November 2019
    Actualités, Press release
    European Commission selects the Steadiest project
    NEXTEAM GROUP, a major player in the production of mechanical assemblies and complex machining for the aeronautical and defense industries, and its Consulting and Technical and Arts and Crafts partners have been selected for the realization of their STEADIEST project. The STEADIEST (Supercritical composiTE mAin DrIvE SysTem) project is part...
  • Tikehau Capital
    25 May 2018
    Press release
    Tikehau Capital invests €114m in Nexteam Group
    Nexteam Group, a major player in the machining of complex and hard metal parts for the aviation and space industries, welcomes Tikehau Capital, an investment and alternative asset manager, as a shareholder, alongside Nexteam’s own management. Pending approval from the French competition authority, this minority stake, alongside Nexteam Group’s management,...
  • Les Echos
    26 April 2018
    Press review
    Les Echos / Investir.fr
    Consult the article here
  • Boursorama
    26 April 2018
    Press review
    Boursorama.com
    Consult the article here
  • Capital
    26 April 2018
    Press review
    Capital.fr
    Consult the article here
  • Le Monde
    25 March 2018
    Press review
    Lemonde.fr
    Consult the article here
  • 3D Natives
    21 March 2018
    Press review
    3Dnatives.com
    Consult the article here
  • Prodways Group
    19 March 2018
    Press release
    Partnership between Nexteam Group & Prodways Group
    On the occasion of the APS Meetings, to be held on 20 and 21 March in Lyon, France, Nexteam Group and Prodways Group are announcing the installation of the first industrial machine based on Rapid Additive Forging (RAF) Technology for large titanium components, on the Nexteam Group's Toulouse site. INSTALLATION...
  • La Tribune
    19 March 2018
    Press review
    La Tribune.fr
    Consult the article here
  • L'Usine Nouvelle
    19 March 2018
    Press review
    L’usine Nouvelle
    Consult the article here
  • Les Echos
    19 March 2018
    Press review
    Les Echos.fr
    Consult the article here
  • Industrie Mag
    8 March 2018
    Press review
    Industrie-mag.com
    Consult the article here
  • SAP IT MANUFACTURING
    6 March 2018
    Press release
    The SAP IT Manufacturing solution
    In the light of the globalisation of the aerospace market and the requirements of those active in it, Nexteam Group has chosen to overhaul its information system completely and acquire the SAP IT Manufacturing Solution, based on S4/HANA. A RESPONSE TO THE CHALLENGES OF THE AEROSPACE INDUSTRY With this new information...
  • BFM TV
    3 February 2018
    Press review
    BFMTV.com
    Consult the article here

Please find the contact of our communication service :

Gaëlle GUILLON, chargée de communication
communication@nexteam-group.com
+33 (0)5 49 02 56 70

Les paramètres des cookies sur ce site sont définis sur « accepter les cookies » pour vous offrir la meilleure expérience de navigation possible. Pour en savoir + sur notre politique de confidentialité : Plus d’informations

Les paramètres des cookies sur ce site sont définis sur « accepter les cookies » pour vous offrir la meilleure expérience de navigation possible. Si vous continuez à utiliser ce site sans changer vos paramètres de cookies ou si vous cliquez sur "Accepter" ci-dessous, vous consentez à cela.

Fermer